Embroidery file viewer
Drop a stitch file and see what is inside it before it goes to the machine.
The viewer reads DST, PES, JEF, EXP, VP3 and XXX files in your browser and answers the questions a shop asks first: how many stitches, how big, how long it takes and whether it fits the hoop. The stitch preview draws every stitch in sewing order, and you can play it back to see where the machine starts, which colour comes when and where it jumps. Under the preview you get the colour blocks, trims, jumps and the longest single stitch, then a hoop check against common Brother, Janome, Bernina, Tajima and Ricoma hoops.
What the numbers tell you
- Stitch count sets the price on most quotes and the time on the machine.
- Size is the box the needle moves in, in millimetres; a design 2 mm short of the hoop edge will hit the frame.
- Trims and jumps show how often the machine cuts the thread or travels without sewing; many of them mean a slow run.
- Longest stitch above about 7 mm can snag on a garment.
Before you sew
Pick your hoop in the hoop row. A DST or EXP file places the design where it was digitized, so the viewer checks both the size and the position and offers to centre the design when it sits off the middle. Download the stitch sheet to print the preview at actual size with the numbers and the colour list, and sew a test on scrap fabric before a run.

