Skip to content

DST file viewer

Open a Tajima DST file and see its stitches, size and run time in seconds.

Your file is read in this tab and never uploaded.

Stitch preview of the sample file leaf.dst

Example: leaf.dst

Stitches
7,619
Size
60.4 × 96.6 mm
Sewing time
about 11 minutes

DST stores no thread colours; the colours shown are placeholders.

A DST is the file most commercial multi-needle machines read: Tajima, Barudan, SWF, Ricoma and many others. Drop it here and the viewer reads it in your browser, draws every stitch in sewing order and answers the first questions: the stitch count, the size in millimetres, the sewing time at your machine speed, the number of colour blocks, trims and jumps, and whether it fits your hoop.

What a DST holds and what it does not

A DST holds needle movements and three commands: stitch, jump and colour change. It does not hold thread colours. What you see as colours in any DST viewer is a stand-in; here every colour block gets its own colour so the order is easy to follow, and the colour row says how many blocks the file has. A stop for an appliqué and a colour change are the same command, so a design with an appliqué step shows one more block than it has threads.

A trim is stored as a short run of jumps, and a DST keeps the position it was digitized at, which is why the hoop check looks at the position as well as the size.

Check it before you sew

Play the design back to see where it starts and how it travels. Pick your hoop to see whether it fits with room to the edge; when it sits off the middle, download the centred copy. Print the stitch sheet for the operator, and run a test on scrap fabric first.

Questions

Can I see the thread colours of a DST file?

No viewer can, because a DST file does not store them. It stores only colour-change stops; the operator chooses which thread goes on which needle. The preview colours here only separate the blocks.

Why does my DST sit off-centre in the hoop?

A DST starts where it was digitized, and that start point need not be the middle of the design. Pick your hoop: when the design is off the middle the viewer says by how much and offers a centred copy to download.

How does a DST store trims?

As a short run of jump stitches. The machine counts the jumps and cuts after a set number, often three; that number is a machine setting, so the same file can trim differently on two machines.

Is my DST uploaded?

No. It is read in this browser tab and never leaves your computer.

Your first design is on us.

Upload a logo and see the stitch preview. No card needed.

Upload an image
Stitch preview of the Ridgeview Eagles chest logo