Auto-digitizing for embroidery shops
Turn your logo into an embroidery file.
Upload a logo, check the stitch preview and download the file your machine reads. No waiting days on a digitizer, no fee for every design.
- First design free
- No charge for the preview
- Nothing to install


- Stitches
- 22,094
- Size
- 90.4 × 90.4 mm
- Machine time
- ≈ 28 min
- Thread
- DST
- PES
- JEF
- EXP
- +5
- Tajima
- Brother
- Barudan
- Ricoma
- Janome
- Husqvarna Viking
- SWF
Logos in, stitch files out.
We made up eight American small businesses and ran their logos through the same engine you use. Each swatch is the real stitch preview; the small card is the artwork it came from.

Hillside Little LeagueAsheville, NC22,094 stitches · 90 × 90 mm · 5 colours

Lone Star Taco Co.Austin, TX7,431 stitches · 90 × 90 mm · 3 colours

Ridgeview EaglesColumbus, OH16,614 stitches · 101 × 101 mm · 5 colours

Bayside Brewing Co.San Diego, CA22,414 stitches · 90 × 90 mm · 5 colours

Engine 7 Fire RescuePortland, ME16,175 stitches · 91 × 91 mm · 4 colours

Sweet Tea BakerySavannah, GA3,403 stitches · 91 × 31 mm · 1 colour

Pine Ridge LandscapingBoulder, CO4,583 stitches · 90 × 31 mm · 3 colours

Golden Retriever CapNashville, TN9,929 stitches · 71 × 66 mm · 4 colours
One job, start to finish.
A left-chest logo for a taco truck in Austin. Everything from the artwork to the file on the USB stick is on these three screens.
- 01
Upload the image
A logo, a drawing or a photo from your phone. Type the width and pick your machine. Nothing else to set.
- 02
Check the preview
Satin goes on narrow shapes, fill on wide ones, running stitch on thin lines. You see the stitch count and the run time before you download.
- 03
Download, copy to USB
The stitch file, the preview and the thread list come together. A credit is used only when you download; past jobs stay in your account.
Monthly, not per design.
A set number of designs every month. If you run out, add a pack; pack credits never expire.
- Every plan: all formats
- Thread list and preview
- Past jobs in your account
- Cancel any time
Top-up pack · 10 design credits for $35. Bought in your account; they never expire.
Questions.
Will the file run on my machine?
DST runs on almost every commercial machine; Tajima, Barudan, Ricoma and SWF all read it. For Brother pick PES, for Janome JEF, for Husqvarna VP3. If you are not sure, try DST first.
Does small lettering come out readable?
Lettering under 4 mm rarely sews cleanly; it usually needs to be made bigger or bolder. You see how the lettering comes out in the preview before you download.
What if I don't like the result?
The preview is free. A credit is used only when you download the file. If the file you downloaded has a problem, write to the support address; if the fault is ours, we give the credit back.
Can I open the DST in Wilcom later and fix it?
Yes. It is a standard DST file; you can open and edit it in Wilcom, Hatch or Pulse.
Who keeps the logo I upload?
You do. We use images only to make your job. If you want yours deleted, write to the support address.
