Skip to content

Convert a PES file to JEF

The stitches are re-encoded, not redrawn.

Your file is read in this tab and never uploaded.

Stitch preview of the sample file leaf.pes

Example: leaf.pes

Stitches
7,619
Size
60.4 × 96.6 mm
Colour blocks
2

PES is the Brother and Baby Lock file; JEF is the Janome and Elna file. Both store a colour per block, so this is the conversion that loses the least. Drop the PES and press the button. The converter writes a JEF, reads it back and shows the stitch, trim and colour-block counts next to the PES's.

What changes from PES to JEF

The stitches stay where they are. Each thread colour is rounded to the nearest Janome thread. Trims become jump runs. The JEF names a hoop chosen from the design size, while the PES named none.

Before you sew

Compare the colours on the machine screen with the threads you have, check the hoop, and sew a test piece on scrap fabric before the order.

Questions

Do my Brother thread colours carry over to the JEF?

The colours carry over as close as Janome allows: JEF stores a Janome thread number, so each PES colour becomes the nearest of 78 Janome threads.

What happens to the PES trims?

They are written as jump runs in the JEF, so the Janome cuts at the same places.

Will the design be the same size?

Yes. A conversion never resizes; the converter shows the stitch count of both files so you can compare.

Can I turn the JEF back into a PES later?

You can, but keep the original PES and convert from it each time: the rounding to Janome threads is not undone by converting back, so the colours would drift.

Your first design is on us.

Upload a logo and see the stitch preview. No card needed.

Upload an image
Stitch preview of the Ridgeview Eagles chest logo