Skip to content

Convert a DST file to JEF

The stitches are re-encoded, not redrawn.

Your file is read in this tab and never uploaded.

Stitch preview of the sample file leaf.dst

Example: leaf.dst

Stitches
7,619
Size
60.4 × 96.6 mm
Colour blocks
2

DST stores no thread colours; the colours shown are placeholders.

DST is the file of Tajima and most commercial machines; JEF is the file of Janome and Elna. Drop the DST, check the colours, and press the button. The converter writes a JEF, reads it back and shows the stitch, trim and colour-block counts next to the DST's.

What changes from DST to JEF

The stitches stay where they are. The JEF gains a Janome thread for each block, since the DST had none: the converter starts from default colours and you can set each block yourself. The file names a hoop picked from the design size. Trims stay as jump runs, and no stitch is longer than the JEF's 12.7 mm limit.

Before you sew

Check the hoop the machine shows against the one you will use, set the threads, and sew a test piece on scrap fabric before the order.

Questions

Why are my JEF colours slightly different from the ones I chose?

JEF stores a Janome thread number, not an exact colour. Each colour you set is rounded to the nearest of 78 Janome threads.

Are trims kept in the JEF?

Yes. Some converters drop JEF trims unless asked; this one writes them as jump runs, so the machine cuts where the DST cut.

Which hoop will my Janome pick?

A JEF names a hoop chosen from the design size: 50 × 50, 110 × 110, 126 × 110, 140 × 200 or 200 × 200 mm. The converter picks it from the DST's size.

Does it work for Elna machines?

Elna machines read JEF as well, so the same file works on them.

Your first design is on us.

Upload a logo and see the stitch preview. No card needed.

Upload an image
Stitch preview of the Ridgeview Eagles chest logo