Thread colour converter
Have a Madeira spool and need the same colour in Isacord or Sulky? Type the code from the spool and see the nearest thread in each other brand, with its colour and how close it comes.
Choose the brand on your spool and type the code as the spool or the colour card prints it; the rows follow as you type. A code that is not on the card gets the nearest codes by number. To start from a colour instead of a code, pick it with the colour field.
How the match is made
Each brand's colour list gives every thread an RGB value. We measure the distance from your thread to every thread of the other brand with CIEDE2000 and take the closest. When a vivid colour lands nearest to a grey, we take the closest thread of the same hue instead: the rule our digitizing engine uses when it picks the threads for a design.
That distance is the ΔE beside each row: 0 is the same colour, and the larger the number, the further apart the two threads are. Below ΔE 2 a row says very close, from 2 to 5 close, above 5 different. These thresholds are ours, not a standard and not a maker's promise. Screens, dye lots and the light in the shop all shift a colour, so hold the two spools side by side before a large order.
Where the colour lists come from
The lists come from the thread palettes that ship with Ink/Stitch, the open-source embroidery software. The codes and the colour names are the makers'.
