Skip to content

Why won't my embroidery file open?

Most embroidery files that will not open are in a format the machine does not read, are still inside a ZIP, are a PDF or a picture rather than a stitch file, are larger than the hoop, or sit off the hoop's centre.

Check it step by step

  1. Check the format. Look at the extension at the end of the file name: .dst, .pes, .jef, .exp, .vp3 or .xxx. Find your machine's brand in the formats by machine table; if the format is not in your machine's row, convert the file to the one that is.
  2. Unpack the ZIP. Designs bought online usually arrive as a ZIP with one file per format. A machine cannot open the ZIP itself: unpack it on the computer and copy only the file in your machine's format.
  3. Make sure it is a stitch file. A PDF, PNG or JPG is a picture of the design, not the stitches; a machine cannot sew it. The picture has to be digitized first. If you drop a picture on the embroidery file viewer, it tells you so.
  4. Check that the file reads at all. Open it in the embroidery file viewer. If the viewer cannot read it either, the file is damaged or cut short; ask for it again.
  5. Compare the size with your hoop. A design larger than the largest hoop of the machine is refused or cut off. The viewer shows the size in millimetres and checks it against the hoop you pick.
  6. Check where it sits. A DST or EXP keeps the position it was digitized at. If the design is far from the centre, some machines put it outside the sewing field. The viewer says how far it is off centre and offers a centred copy.
  7. Check the USB stick. Many machines read only a stick formatted as FAT32, and some older ones only small sticks, files in the top folder or short file names. Copy the file to the top level of the stick and give it a short name without special characters.

When it still will not open

Count the colour changes: some formats and machines accept only a limited number, for example about 20 in a Singer XXX. Look at the version, too: an older machine may not read a file saved in a newer version of its format, so ask for it saved in an older version. If nothing works, the file was likely made for a different machine family; ask the digitizer for the format in your machine's row.

Questions

My file opens on the computer but not on the machine. Why?

The computer program reads more than the machine does. The usual causes are a format the machine does not read, a design larger than the hoop the machine has, or more colour changes than the machine accepts. Check the size and the format first.

Can a damaged file be repaired?

Rarely. If no viewer can read it, ask the sender for the file again, ideally straight from the digitizing program rather than through a chat app that may compress or rename it.

Will converting the file to my machine's format lose anything?

The stitches stay the same. What the target format cannot store is lost: thread colours when you convert to DST or EXP, and trims can be written differently. Sew a test on scrap fabric before production.

My machine shows the design, but in the wrong place or cut off. What now?

The design is larger than the hoop, or it sits off the middle of the hoop. Pick your hoop in the viewer: it says whether the design fits and by how much it is off centre, and offers a centred copy.

Your first design is on us.

Upload a logo and see the stitch preview. No card needed.

Upload an image
Stitch preview of the Ridgeview Eagles chest logo