Convert a PNG to a DST embroidery file
Upload the PNG, type the width in millimetres and pick your machine. Embrodo digitizes the image (it chooses how every shape is stitched) and writes a DST, with a stitch preview and its stitch count to check before you download.
Stitch preview · white fabric
Artwork- Stitches
- 22,094
- Size
- 90.4 × 90.4 mm
- Machine time
- ≈ 28 min
How to convert a PNG to DST in three steps
- Upload the PNG. A logo, a drawing or a photo from your phone. JPG, PDF and SVG work too, up to 12 MB.
- Type the width and pick the machine. The width is the size on the garment, for example 90 mm on a chest or 250 mm on a back. Tajima, Barudan, Ricoma and SWF read DST; for Brother, Janome or Husqvarna Viking pick PES, JEF or VP3 instead.
- Check the preview, then download. You see the stitches on fabric with the stitch count, the size and the machine time. The preview is free; a credit is used only when you download the stitch file. Copy it to a USB stick and load it on the machine.
What the conversion decides
A PNG is a grid of pixels; a DST is a list of needle movements. Between the two, someone has to digitize: decide how each shape is stitched. Here the engine does it:
- Stitch type per shape: satin on narrow shapes such as letters and borders, fill on wide areas, running stitch on thin lines.
- Density, underlay and pull compensation: set by the engine, not by you, so there are no stitch parameters to learn.
- Colours: the image is reduced to a few flat colours (six by default) and each one becomes a colour stop, matched to a thread of the brand you choose.
- Order, jumps and trims: the order the shapes are stitched in, and where the thread is cut between them.
Where it has limits
- Small lettering. Text under 4 mm high rarely stitches cleanly. Make it larger or bolder; the preview shows how the lettering came out before you pay.
- Photos and soft shading. Embroidery uses flat thread colours. A photo or a gradient is reduced to flat colours and loses detail; a clean logo gives the cleanest file.
- Resizing a DST. A DST does not scale well: making it bigger or smaller does not recalculate the stitch density. Keep the original image and make a new file at the new size.
What a DST file holds, and what it does not
DST is Tajima's format. It holds the movements of the needle: stitches, jumps, trims and colour changes. A single stitch is at most 12.1 mm long; longer moves are made as jumps.
It does not hold colours, only the stops where the machine changes thread. Which thread goes on which needle is set on the machine. That is why every download comes with a thread list: the colours in stitch order, with thread names and numbers.
| Format | Machines that read it |
|---|---|
| DST | Tajima, Barudan, Ricoma, SWF |
| PES | Brother |
| JEF | Janome |
| VP3 | Husqvarna Viking |
